Author Topic: Help with hid retrofit  (Read 275 times)

Offline b-dup

  • Member
  • **
  • Posts: 132
Help with hid retrofit
« on: August 05, 2016, 09:19:58 AM »
I did a retrofit to my 2011 wrx about 2-3 years ago. At first it was really good. After taking my headlight apart 2-3 times I really don't have the time and energy to want to do it again after dealing with the sealant and adhesive. I'm almost positive that that the vibrations of the car over two years has shaken on of the screws loose to the projector because about a year ago I notice one of the projectors only putting out about 10% the light it should be. I tried swapping the ballasts and it's always the same headlight. Could be the harness I suppose so I'll trouble shoot that soon but either way I want someone to drill an opening for the ballast wire to connect to the bulb and seal it so its air tight to prevent condensation on the inside. Where can I go to have that done and what price range would it be?
when you are asked why, reply with why not?